CCNA v2.0, section 4.0, lab 6, in slides: add a remote office behind the ISP in Packet Tracer and see its ping to the HQ dropped, turn on the security license, build a site-to-site IPsec tunnel between R1 and R4 with a NAT exemption on R1, watch the IKE SA and the ESP counters, follow an ESP packet in simulation mode, and read a remote-access session; then break the tunnel in five ways (the pre-shared key, the transform set, a copied crypto ACL, the NAT exemption, the crypto map) and find each one.
The slides
The lab is twenty-one slides in five parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. Adding the remote office: R4 and PC4, the fiber link to the ISP, their addresses, and PC4's ping dropped at the ISP.
- 2. Turning on the security license:
securityk9 on R1 and R4. - 3. Building the tunnel: phase 1 and the crypto ACL, phase 2 and the crypto map, the NAT exemption on R1, and R4 as R1's mirror.
- 4. Checking the tunnel: the first ping and the IKE SA, the ESP counters, an ESP packet in simulation mode, a remote-access session from prepared output, and saving.
- 5. Breaking the tunnel: a different pre-shared key, a different transform set, a copied crypto ACL, a missing NAT exemption and a missing crypto map, compared in one table.
The files
- The network it starts from:
lab4-4.pkt, built in
Lab 4.4; it saves lab4-6.pkt. - The configurations it builds: each device's configuration, as plain text, in the
ccna repository, with the remote-access session as prepared output.
- What Packet Tracer limits: remote-access VPNs, so that step is read from prepared output.
- The lesson:
IPsec VPNs.