CCNA v2.0, section 4.0, lesson 5, in slides: each attack on the access ports drawn first, then the switch feature that stops it: MAC flooding and port security (maximum, sticky addresses, protect, restrict and shutdown, the err-disabled state and its recovery); DHCP, a rogue DHCP server and DHCP snooping (trusted and untrusted ports, the binding table, option 82, starvation and the rate limit); ARP spoofing and dynamic ARP inspection; storm control and its thresholds; a rogue IPv6 router advertisement and RA guard.
The slides
The lesson is twenty-two slides in six sections, after an introduction. Each section draws an attack on ASW1, the access switch of section 2.0's campus, and then the feature that stops it.
- Introduction: the network, with an attacker's PC and a rogue DHCP server on ASW1, and the lesson's six sections.
- 1. Port security: MAC flooding, port security, secure MAC addresses, the violation modes, and the err-disabled state.
- 2. DHCP snooping: DHCP's four messages, a rogue DHCP server, trusted and untrusted ports, the binding table, the configuration, option 82, and DHCP starvation.
- 3. Dynamic ARP inspection: ARP spoofing, ARP checked against the bindings, and the configuration.
- 4. Storm control: the thresholds, drawn as a chart of one port's broadcast level, and the configuration.
- 5. RA guard: a rogue IPv6 router advertisement, and RA guard's policies on IOS.
- 6. The features and the lab: the features compared, and the network Lab 4.5 builds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
- Earlier lessons it builds on:
The lab
Sources