CCNA v2.0, section 4.0, lab 5, in slides: give the campus a DHCP server on DSW1 in Packet Tracer, then turn on port security with sticky addresses, DHCP snooping with trusted uplinks and a rate limit, dynamic ARP inspection with an ARP access list for the printer, and storm control, and read an RA guard configuration; then attack the access ports in five ways (a second PC on a sticky port, err-disable recovery, a rogue DHCP server, an untrusted uplink, a static address) and find each one.
The slides
The lab is nineteen slides in six parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. Serving addresses from DSW1: DHCP pools for VLANs 10 and 20, and the PCs moved to DHCP.
- 2. Port security: one sticky MAC address per host port, and the addresses read back.
- 3. DHCP snooping: the access switches' configuration, and every address renewed into the binding table.
- 4. Dynamic ARP inspection: the configuration, and an ARP access list for the printer's static address.
- 5. Storm control and RA guard: storm control on ASW1's host ports, an RA guard configuration read from prepared output, and saving.
- 6. Attacking the access ports: the attacker's PC on a sticky port, err-disable recovery, a rogue DHCP server, an untrusted uplink, and a static address.
The files
- The network it starts from:
lab2-4.pkt, built in
Lab 2.4. - The configurations it builds: each device's configuration, as plain text, in the
ccna repository.
- What Packet Tracer may lack: RA guard is read from prepared output; if Packet Tracer refuses dynamic ARP inspection or storm control, the slides' outputs stand in.
- The lesson:
Layer 2 Security.