CCNA v2.0, section 4.0, lesson 4, in slides: the access control list as an ordered list of permit and deny lines walked top down, first match and the implicit deny; wildcard masks bit by bit, against subnet masks, host and any, and ranges; standard and extended ACLs, ports and the established keyword, and where each kind goes on the company network; named ACLs and sequence numbers, ip access-group in and out, the router's order of ACLs, routing and NAT, VTY lines with access-class, and ACLs that select traffic for NAT; show access-lists and its counters, show ip interface, and the common ACL faults, an ACL that drops OSPF hellos among them.
The slides
The lesson is twenty-two slides in five sections, after an introduction.
- Introduction: the company network, and the lesson's five sections.
- 1. How an ACL decides: the access control list, the order of its lines, and the implicit deny.
- 2. Wildcard masks: the wildcard mask bit by bit, against the subnet mask,
host and any, and matching a range. - 3. Standard and extended ACLs: what each one checks, the
established keyword, and where each one goes. - 4. Writing and applying ACLs: named ACLs and sequence numbers,
ip access-group, the router's order of ACLs, routing and NAT, VTY lines, and ACLs that select traffic. - 5. Verification and faults: the counters of
show access-lists, show ip interface, the common faults, an ACL that drops OSPF hellos, and the ACLs of Lab 4.4.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
- The site's tools it links:
The lab
Sources