CCNA v2.0, section 4.0, lab 4, in slides: on the company network in Packet Tracer, lock R1's VTY lines to the admin PC with a standard named ACL, filter the branch on R3 with an extended ACL that permits only the web and DNS to HQ's servers and ping, and filter R1's internet port with return traffic and WEB1's public address, reading the counters during every test; then make five ACL faults (a deny above the permits, the wrong direction, a subnet mask as a wildcard, an ACL that drops OSPF, the wrong interface) and find each one.
The slides
The lab is twenty slides in four parts, after an introduction, one step each.
- Introduction: what the lab does, what it needs, and the checks of the network it starts from.
- 1. Locking R1's VTY lines: VTY-ADMIN written and applied, SSH tested from PC1 and PC2, and its counters.
- 2. Filtering the branch: BRANCH-IN planned, written on R3's G0/0, tested from PC3, and its counters read.
- 3. Filtering the internet port: OUTSIDE-IN written on R1's G0/2, tested from both sides, the address it checks before NAT, and saving.
- 4. Breaking the filters: a deny above the permits, the wrong direction, a subnet mask as a wildcard, an ACL that drops OSPF, and the wrong interface, compared in one table.
The files
- The network it starts from:
lab4-3.pkt, built in
Lab 4.3; it saves lab4-4.pkt. - The configurations it builds: what the lab adds to R1 and R3, and the lines of the earlier labs it relies on, as plain text, in the
ccna repository.
- The lesson:
IPv4 Access Control Lists.