CCNA v2.0, section 3.0, lab 4, in slides: configure HSRP version 2 on R1 and R2 in Packet Tracer for the HQ LAN's gateway, read show standby, shut R1 during a ping and watch R2 take over, track R1's uplink, read VRRP's outputs from prepared copies, then break the group in five ways and find each fault with show standby brief.
The slides
The lab is twenty slides in four parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. Configuring HSRP on R1 and R2: the gateway address no router holds, HSRP on R1 and on R2,
show standby brief, PC1's ARP cache, and show standby. - 2. Failing R1: R1's LAN interface shut during a ping, R1 brought back, its uplink tracked, and saving.
- 3. Reading VRRP: VRRP's commands tried in Packet Tracer, and VRRP's outputs read from prepared copies.
- 4. Breaking the group: another group number, another virtual IP, no preemption, no tracking, and another version.
The files
- The network it starts from:
lab3-3.pkt, built in
Lab 3.3. - The network it saves:
lab3-4.pkt. - The configurations it builds: R1's and R2's lines, and the prepared VRRP outputs, as plain text, in the
ccna repository.
- The lesson:
HSRP and VRRP.