CCNA v2.0, section 3.0, lesson 4, in slides: the one default gateway a host has and what fails without a virtual router, the virtual IP and MAC a group shares, HSRP versions 1 and 2 and their virtual MAC formats, the HSRP states, priority, preemption, hello and hold timers, tracking, show standby and show standby brief read in every state and with every common mistake, VRRP with its master, backups and address owner, show vrrp brief, and HSRP and VRRP compared.
The slides
The lesson is twenty-three slides in five sections, after an introduction.
- Introduction: the HQ LAN, its two routers and its virtual gateway, and the lesson's five sections.
- 1. The single gateway: one default gateway per host, the virtual router, and the same MAC address after a failover.
- 2. HSRP: versions 1 and 2, the virtual MAC addresses, the states, priority and the election, the hello and hold timers, preemption, tracking, and the configuration.
- 3. Reading HSRP's outputs:
show standby, show standby brief, after a failover, without preemption, two active routers, and a virtual IP that differs. - 4. VRRP: the protocol, the address owner,
show vrrp brief, and HSRP and VRRP compared. - 5. The lab's network: the group Lab 3.4 configures.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources