CCNA v2.0, section 3.0, lesson 3, in slides: link-state routing and SPF, the router ID, enabling OSPF with network statements or on the interface, Hello packets and what neighbors must agree on, the neighbor states, broadcast and point-to-point networks, the DR and BDR election, cost and the reference bandwidth, passive interfaces, the default route, verifying OSPFv2, and OSPFv3 for IPv6.
The slides
The lesson is twenty-two slides in seven sections, after an introduction.
- Introduction: the network, and the lesson's seven sections.
- 1. Link-state routing: the three steps of link-state routing, and from the database to the routing table.
- 2. Neighbors: the router ID, enabling OSPF on an interface, Hello packets and what neighbors must agree on, the neighbor states, and the broadcast and point-to-point network types.
- 3. The DR and the BDR: why a segment elects a DR, the election by priority and router ID, and why the election does not preempt.
- 4. Routes and costs: the cost of an interface, the reference bandwidth, passive interfaces, and advertising a default route.
- 5. Verifying OSPFv2:
show ip ospf neighbor, show ip ospf interface, show ip protocols and show ip route ospf. - 6. OSPFv3: configuring and verifying OSPF for IPv6.
- 7. The lab's network: the network Lab 3.3 builds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The demos
The deck configures and verifies OSPF; the site's OSPF demos show the mechanism behind it.
The lab
Sources