CCNA v2.0, section 3.0, lesson 2, in slides: the ip route command with a next hop, an exit interface or both, why an exit interface alone on Ethernet relies on proxy ARP, the recursive lookup, network, default, host and summary routes, administrative distance and floating static routes with their switchover, IPv6 static routes and link-local next hops, the return route, and static route faults.
The slides
The lesson is twenty slides in six sections, after an introduction.
- Introduction: the company network, and the lesson's six sections.
- 1. The ip route command: a static route in the routing table, the three forms of
ip route, an exit interface alone on Ethernet (proxy ARP), and the recursive lookup. - 2. Kinds of static route: network, default, host and summary routes.
- 3. Floating static routes: administrative distance, the floating route, its switchover drawn against time, and failures beyond the link.
- 4. IPv6 static routes:
ipv6 route, and a link-local next hop with its exit interface. - 5. Troubleshooting: the return route, verifying, a route that is not installed, and static route faults.
- 6. The lab's network: the routes Lab 3.2 adds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources