CCNA v2.0, section 3.0, lab 2, in slides: give the company routers in Packet Tracer their IPv4 and IPv6 static routes, a host route and floating default routes, shut R1's uplink and watch the traffic move to R2 and back, then break the routes in five ways and find each fault with show ip route, ping and tracert.
The slides
The lab is twenty-one slides in five parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. The starting network: R1's table with connected routes only, and a ping to the branch that fails.
- 2. IPv4 static routes: R1, R2, R3 and the ISP get their routes, tested with ping and tracert.
- 3. IPv6 static routes: the same routes for IPv6, R1's floating route through R2's link-local address, and the tests.
- 4. The floating routes: R1's backup default route, the uplink shut, the ISP's way back, the uplink restored, and saving.
- 5. Fault round: a missing return route, a missing next hop, an unreachable next hop, a floating route without its distance, and a mistyped host route.
The files
- The network it starts from:
lab3-1.pkt, built in
lab 3.1, with every interface addressed and connected routes only. - The network it saves:
lab3-2.pkt. - The configurations it builds: each router's configuration, as plain text, in the
ccna repository.
- The lesson:
Static Routes.