CCNA v2.0, section 3.0, lesson 1, in slides: what a routing table is and how a router uses it for each packet, route sources and their codes, a route line field by field, connected and local routes, longest prefix match drawn as nested ranges and in bits, administrative distance and metric, equal-cost paths, the default route and the gateway of last resort, the IPv6 table with link-local next hops, and packets traced hop by hop on the company network.
The slides
The lesson is twenty-two slides in six sections, after an introduction.
- Introduction: the company network, and the lesson's six sections.
- 1. The routing table: a router and its table, forwarding one packet,
show ip route, the route codes, a route line field by field, and connected and local routes. - 2. Choosing a route: longest prefix match as nested ranges and in bits, administrative distance, two sources for one prefix, the metric, equal-cost paths, and the decision as a flowchart.
- 3. The default route:
0.0.0.0/0 and the gateway of last resort, and a packet with no matching route. - 4. The IPv6 table:
show ipv6 route, and link-local next hops. - 5. Worked examples: PC3 to PC1 and PC3 to WWW hop by hop, and
show ip route for one address. - 6. The lab's network: what Lab 3.1 builds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources