CCNA v2.0, section 3.0, lab 1, in slides: build and address the company network in Packet Tracer, IPv4 and IPv6, and save it as lab3-1.pkt; add prepared static routes, predict each next hop from R3's table and from R1's table with OSPF, check with show ip route and tracert; then break the routes in four ways and find each fault from the tables.
The slides
The lab is twenty-one slides in three parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. Addressing the company network: the devices and their cables, the four routers, the switches, the hosts, and R3's table of connected routes; saved as
lab3-1.pkt. - 2. Predicting the next hop: the routes back to the branch, R3's five routes, predictions from R3's table, checks with
show ip route and tracert, the IPv6 routes, and predictions from R1's table with OSPF. - 3. Breaking the routes: a host route removed, a wrong next hop, a missing route back, and a link shut down, compared in one table.
The files
- The network it starts from: an empty Packet Tracer workspace.
- The network it saves:
lab3-1.pkt, addresses only, the start of the section's later labs; the routes go into a copy, lab3-1-routes.pkt. - The configurations it builds: each device's configuration, and the routes of part 2, as plain text, in the
ccna repository.
- The lesson:
The Routing Table.