CCNA v2.0, section 2.0, lesson 4, in slides: layer 2 loops, the versions of spanning tree, the bridge ID, the root bridge election, root primary and secondary, path cost, port roles and the tie-breakers, port states and RSTP's speed, reading show spanning-tree, a tree per VLAN, PortFast, BPDU guard, root guard, loop guard, where each one goes, and spanning tree faults.
The slides
The lesson is nineteen slides in five sections, after an introduction. Every slide uses the section's network, whole: each access switch with a trunk to each distribution switch.
- Introduction: the network, and the lesson's five sections.
- 1. Loops: a layer 2 loop, and the versions of spanning tree.
- 2. Electing the root: the bridge ID, the election, root primary and secondary, and path cost.
- 3. Port roles and states: the roles, the tie-breakers, the states, reading
show spanning-tree, and the tree of a second VLAN. - 4. Protecting the edge: PortFast, BPDU guard, root guard, loop guard, where each one goes, and spanning tree faults.
- 5. The lab's network: the network Lab 2.4 builds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources