CCNA v2.0, section 2.0, lab 4, in slides: give each access switch a second uplink in Packet Tracer, switch to Rapid PVST+, find the root elected by default, make the distribution switches the roots, read every uplink's role in two VLANs, cut a root port during a ping, turn on PortFast, BPDU guard, root guard and loop guard; then break spanning tree in three ways and find each fault.
The slides
The lab is fifteen slides in four parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs.
- 1. Adding the second uplinks: the links to DSW2, Rapid PVST+, and the root each VLAN elected.
- 2. Choosing the roots: root primary and secondary, every uplink's role, and a root port cut during a ping.
- 3. Protecting the edge: PortFast and BPDU guard, root guard and loop guard, and saving.
- 4. Breaking spanning tree: a switch on a host port, a switch claiming the root, and the priorities back at their defaults.
The files
- The network it starts from:
lab2-3.pkt, built in the previous lab. - The configurations it builds: each device's configuration, as plain text, in the
ccna repository.
- The lesson:
Rapid PVST+.