CCNA v2.0, section 2.0, lesson 1, in slides: one switch as one broadcast domain, VLANs as broadcast domains inside a switch, one VLAN per IP subnet, the MAC address table per VLAN, VLAN numbers, access ports and their configuration, show vlan brief and show interfaces switchport, access port faults, and the ports of edge hosts: IP phones and the voice VLAN, Power over Ethernet, standalone and controller-based access points, virtualized hosts and network appliances.
The slides
The lesson is eighteen slides in four sections, after an introduction. Every slide uses the same network: one access switch, ASW1, with two PCs, a printer, and an IP phone with a third PC behind it.
- Introduction: the network, and the lesson's four sections.
- 1. VLANs: one switch as one broadcast domain, a VLAN as a broadcast domain inside the switch, one IP subnet per VLAN, the MAC address table per VLAN, and VLAN numbers.
- 2. Access ports: the access port, creating VLANs and assigning ports,
show vlan brief, show interfaces switchport, and three access port faults. - 3. Edge hosts: the port each kind of host needs, the voice VLAN, Power over Ethernet, standalone and controller-based access points, virtualized hosts and network appliances.
- 4. The lab's network: the network Lab 2.1 builds.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources