CCNA v2.0, section 1.0, lab 6, in slides: survey the Wi-Fi around you with an analyzer (bands, channels, signal, co-channel and adjacent-channel overlap, interference), plan channels on 2.4 and 5 GHz, add two access points with WPA2 and two laptops to section 1.0's network in Packet Tracer with R1 as their DHCP server, then solve six help-desk tickets across wired and wireless clients: a wrong passphrase, a security mode the client does not support, the wrong band, no DHCP address, a wrong gateway and a wrong DNS server, each shown on Windows, macOS and Linux.
The slides
The lab is twenty-one slides in three parts, after an introduction, one step each.
- Introduction: what the lab does, and what it needs; Packet Tracer 9 has no WPA3, so the lab uses WPA2.
- 1. Surveying the air around you: a Wi-Fi analyzer on your own phone or laptop, the 2.4 GHz band, the 5 and 6 GHz bands, and your own connection read in four places.
- 2. Building the WLAN in Packet Tracer: a channel plan, two access points (AccessPoint-PT-N on 2.4 GHz, AccessPoint-PT-A on 5 GHz) on SW1, the SSID and WPA2, R1's DHCP pool, the laptops joined, and the ladder climbed on a working laptop.
- 3. The help desk: the rules, the ladder on each system, six tickets, one slide per ticket with what it looks like on Windows, macOS and Linux, and the six compared.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The files
Sources