CCNA v2.0, section 1.0, lesson 6, in slides: frequency, wavelength and the dBm, attenuation and the signal-to-noise ratio, the 2.4, 5 and 6 GHz bands, channels 1, 6 and 11 and channel width, co-channel and adjacent-channel interference, the access point, SSID and BSSID, joining a WLAN from beacon to DHCP, WPA2 and WPA3, personal and enterprise (802.1X with RADIUS), a security mismatch on the client, the wireless status on Windows, macOS and Linux, a Wi-Fi analyzer, and a troubleshooting order for any client.
The slides
The lesson is twenty slides in five sections, after an introduction. The network is section 1.0's, with two access points and two laptops added on SW1.
- Introduction: the network, and the radio basics the lesson opens with.
- 1. Radio basics: the radio wave, its frequency and wavelength; signal strength in dBm; attenuation in free space and through walls; the signal-to-noise ratio.
- 2. Bands and channels: the 2.4, 5 and 6 GHz bands; the 2.4 GHz channels and why 1, 6 and 11; the 5 GHz channels at 20, 40, 80 and 160 MHz.
- 3. Interference: co-channel, adjacent-channel and clear channels side by side; non-Wi-Fi sources and obstacles.
- 4. The WLAN and its security: the access point, the SSID and the BSSID; joining a WLAN, from the beacon through the four-way handshake to DHCP; WPA2 and WPA3; personal and enterprise authentication; a security mismatch on the client.
- 5. Troubleshooting a client: the wireless status on Windows, macOS and Linux; reading a Wi-Fi analyzer; the troubleshooting ladder (link, IP address, gateway, DNS) and each rung failing; the lab's network.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources