CCNA v2.0, section 1.0, lesson 5, in slides: hexadecimal, the IPv6 address as eight hextets, the shortening and expanding rules, the prefix length, sizing a /48 site into /64 networks, global, unique local and link-local addresses, multicast, static addresses on IOS, modified EUI-64 derived by hand, SLAAC from router advertisements, neighbor discovery in place of ARP, show ipv6 interface, the client commands on Windows, Linux and macOS, and the faults of Lab 5.
The slides
The lesson is twenty-two slides in six sections, after an introduction. The network is
lesson 3's three sites, with IPv6 beside IPv4.
- Introduction: the network and its IPv6 plan, and the exam topics.
- 1. Hex and the address format: hexadecimal digits and their four bits, the eight hextets, shortening an address, and expanding a short one.
- 2. Prefix length and sizing: the prefix and the interface ID, a /48 site as 48 + 16 + 64 bits, and how many /64 networks a block holds.
- 3. Address types: global unicast, unique local and link-local, the three on the network, and multicast and the other special addresses.
- 4. Assigning addresses: a static address on IOS, modified EUI-64 step by step, SLAAC from a router advertisement, neighbor discovery beside ARP, and the solicited-node group.
- 5. IOS and client commands:
show ipv6 interface, and the addresses, gateway and neighbors on Windows, Linux and macOS. - 6. Faults and the lab's network: routing not enabled, a link-local address alone, a mismatched prefix length, a mistyped prefix, and the network of Lab 5.
The buttons on the left and right edges move between slides. So do the arrow keys and a swipe.
The lab
Sources